Rockwell Automation RECOMM-485 RS485 DFI Communications Module - Manual (Page 31)

Using VS Utilities on the RS485 Network 5-1
C
HAPTER
5
Using VS Utilities
on the RS485 Network
Chapter 5 provides instructions for configuring VS Utilities (version
1.01 or higher) to access SP600 drives on the RS485 network.
Figure 5.1 shows a typical RS485 DF1 network.
To connect to the network using VS Utilities:
Step 1. Select Explore > Connect > Network as shown in figure
5.2.
Figure 5.1 – Typical RS485 DF1 Network
Figure 5.2 – Connecting to the Network
RECOMM-232
Serial Converter
Module
SP600 Drives PC Running
VS Utilities
VS Utilities