Rockwell Automation RECOMM-485 RS485 DFI Communications Module User Manual
Page 49
RS485 DF1 Module Parameters
B-3
Sets the DF1 data rate if the Data Rate switch on the module is set
to “PGM” (Program).
Displays the DF1 data rate actually used by the module.
Displays the size of the Reference/Feedback. The drive determines
the size of the Reference/Feedback.
Displays the size of each Datalink word. The drive determines the
size of Datalinks.
5
DF1 Rate Cfg
Range:
0 = 1200 bps
1 = 2400 bps
2 = 4800 bps
3 = 9600 bps
4 = 19.2 kbps
5 = 38.4 kbps
Default:
3 = 9600 bps
Type:
Read/Write
Reset Required: Yes
6
DF1 Rate Actual
Range:
0 = 1200 bps
1 = 2400 bps
2 = 4800 bps
3 = 9600 bps
4 = 19.2 kbps
5 = 38.4 kbps
Default:
3 = 9600 bps
Type:
Read Only
Reset Required: Yes
7
Ref/Fdbk Size
Range:
0 = 16-bit
1 = 32-bit
Default:
0 = 16-bit
Type:
Read Only
Reset Required: N/A
8
Datalink Size
Range:
0 = 16-bit
1 = 32-bit
Default:
0 = 16-bit
Type:
Read Only
Reset Required: N/A