Rockwell Automation RECOMM-485 RS485 DFI Communications Module - Manual (Page 45)

Technical Specifications A-1
A
PPENDIX
A
Technical
Specifications
Communications
Electrical
Mechanical
Environmental
Network
Protocol
Data Rates DF1
1200, 2400, 4800, 9600, 19.2 K, 38.4 K, PGM
If the Data Rate switch is set to “PGM,” the
module will use the setting of module
parameter 5 (DF1 Rate Cfg) for the data rate.
Drive
Protocol
Data Rates
DPI
125 K or 500 K
Consumption
Drive
150 mA at 5 VDC supplied through the drive
Dimensions
Height
Length
Width 16 mm (0.625 in)
86 mm (3.34 in)
81 mm (3.16 in)
Weight 60 g (2 oz)
Temperature
Operating
Storage -10 to +50 ° C (14 to 149 ° F)
-40 to +85 ° C (-40 to 185 ° F)
Relative Humidity 5 to 95% non-condensing
Atmosphere Important: The module must not be
installed in an area where the ambient
atmosphere contains volatile or corrosive
gas, vapor, or dust. If the module is not
going to be installed for a period of time, it
must be stored in an area where it will not
be exposed to a corrosive atmosphere.