Rockwell Automation RECOMM-485 RS485 DFI Communications Module - Manual (Page 33)

Using VS Utilities on the RS485 Network 5-3
Step 4. Click on each node to have VS Utilities perform a device
read as shown in figure 5.5. A “+” will appear to the left of
the node upon completion.
Step 5. Click on the “+” for each node to expand the information
as shown in figure 5.6.
Figure 5.5 – Result of Device Read Performed by VS Utilities
Figure 5.6 – Expanding Each Node
VS Utilities
Node 1: - SP600
Node 2: - SP600
Node 2: - SP600
Node 1: - SP600
0 - SP600 240V 4.2A
1 - LCD OIM
2 - RECOMM-232 RS232 DF1
5 - RECOMM-485 RS485 DF1
0 - SP600 240V 4.2A
1 - LCD OIM
5 - RECOMM-485 RS485 DF1
VS Utilities
Node 2: - SP600