Rockwell Automation RECOMM-485 RS485 DFI Communications Module - Manual (Page 43)

Troubleshooting the Module and Network 6-9
20 Normal Startup The module successfully started up.
21 Message Timeout A Client-Server message sent by the
peripheral was not completed.
22 DPI Fault Msg The DPI host has faulted.
23 DPI Fault Clear The DPI host transitioned from a faulted to a
non-faulted state.
24 Flt Cfg Error At least one of the Fault Configuration
parameters contains a value greater than
65535 and the DPI product expects a 16-bit
value.
25 DF1 NAK NAK received.
26 Manual Reset The module was reset by the user.
27 Language CRC Bad The language text memory segment is
corrupt.
Table 6.6 – Event Codes and Descriptions (Continued)
Code Event Description