Rockwell Automation DC3E Non-Regenerative DC Drive User Guide 1/4 - 2 HP, 115/230 VAC User Manual
Page 23
Advertising
15
Alternate speed adjust potentiometer connections
Alternate speed adjust potentiometer connections may be
found in the Application Notes section of this user guide.
IMPORTANT:
The user may choose to install a 5K ohm
speed adjust potentiometer; however, the MIN SPD and
MAX SPD trimpots must be recalibrated if the 5K ohm
potentiometer is used.
Installation
250-0287-rev2.qxd
3/12/01
10:27 AM
Page 15
Advertising