Rockwell Automation DC3E Non-Regenerative DC Drive User Guide 1/4 - 2 HP, 115/230 VAC User Manual
Page 24
Advertising
16
Cage-clamp terminals
Logic connections are made to cage-clamp terminals. To
insert a wire into the cage-clamp terminal:
Figure 5. Cage-Clamp Terminal
Installation
1. Press down on the lever arm using a
small screwdriver.
2. Insert wire into the wire clamp.
3. Release the lever arm to clamp wire.
250-0287-rev2.qxd
3/12/01
10:27 AM
Page 16
Advertising