Rockwell Automation DC3E Non-Regenerative DC Drive User Guide 1/4 - 2 HP, 115/230 VAC - Manual (Page 3)

i
ATTENTION: Only qualified personnel familiar with the
construction and operation of this equipment and the
hazards involved should install, adjust, operate, and/or
service this equipment. Read and understand this
instruction manual in its entirety before proceeding.
Failure to observe this precaution could result in severe
bodily injury or loss of life.
ATTENTION: The user is responsible for conforming
with all applicable local and national codes. Failure to
observe this precaution could result in severe bodily
injury or loss of life.
ATTENTION: The control circuit is at line potential
when the drive is energized. Use a non-metallic
screwdriver when making adjustments to the circuit
board potentiometers. Exercise extreme caution as
hazardous voltage exists. Failure to observe these
precautions could result in severe bodily injury or loss of
life.
ATTENTION: It is possible for a drive to run at full
speed as a result of a component failure. Please
ensure that a master switch has been placed in the AC
line to stop the drive in an emergency.
ATTENTION: Reduce the chance of an electrical fire,
shock, or explosion by proper grounding, over-current
protection, thermal protection and enclosure. Follow
sound maintenance procedures.
ƽ
250-0287-rev2.qxd 3/12/01 10:27 AM Page i