Rockwell Automation DC3E Non-Regenerative DC Drive User Guide 1/4 - 2 HP, 115/230 VAC - Manual (Page 85)

T1, T2 (TB502)
Connections to optional external tachometer.
Enclosed drive terminals
L1 (terminal 1)
Hot terminal for AC line voltage.
L2/115 (terminal 2)
Neutral terminal for 115 VAC line voltage.
L2/230 (terminal 3)
Neutral terminal for 230 VAC line voltage.
F1, F2 (terminals 4 and 5)
Field coil connections (shunt wound motors only). Field
voltage is 100/200 VDC.
A1, A2 (terminals 6 and 7)
Connections to motor.
COM (terminal 8)
Circuit common (-) for external reference signal.
REF (terminal 9)
Signal (+) lead for external reference signal.
77 Troubleshooting
250-0287-rev2.qxd 3/12/01 10:27 AM Page 77