Rockwell Automation DC3E Non-Regenerative DC Drive User Guide 1/4 - 2 HP, 115/230 VAC User Manual
Page 48
Advertising
![background image](/manuals/581714/48/background.png)
2. Apply AC line voltage.
3. Slowly increase the speed reference signal and press the
START pushbutton. The motor accelerates as the
potentiometer is turned CW or the external speed
reference is increased. Continue until the desired speed
is reached.
4. Press STOP pushbutton to coast motor to a stop.
40
Operation
250-0287-rev2.qxd
3/12/01
10:27 AM
Page 40
Advertising