Rockwell Automation DC3E Non-Regenerative DC Drive User Guide 1/4 - 2 HP, 115/230 VAC - Manual (Page 76)

68 Troubleshooting
Figure 19. Diagnostic LED Locations
Diagnostic LEDs
DC3N Series drives are equipped with two diagnostic
LEDs (see Figure 19 for LED location). The red
CURRENT LIMIT LED turns on whenever the drives
reaches current limit and stays off whenever the drive is
not in current limit (normal operation). The green POWER
LED turns on whenever AC line voltage is applied to the
drive and stays off whenever there is no AC line voltage
applied to the drive.
CURRENT
LIMIT
POWER
250-0287-rev2.qxd 3/12/01 10:27 AM Page 68