Metrohm 792 Basic IC - Manual (Page 101)

4 Operation
792 Basic IC
92
Min height Minimum height of peaks to be detected.
Negative peaks If this option is enabled, negative peaks are
also detected.
Events
Tab Events of Integration parameters window for definition of integration
events. Integration events have a higher priority than integration pa-
rameters and are used for fine-tuning of the integration process. They
should be used only in the case when problems cannot be solved by
tuning a set of parameters from the integration parameters window.
Number of events
Number of integration events (read-only).
<Add> Add event to the list.
<Modify> Edit the selected event.
<Delete> Delete the selected event.
<Apply> Accept integration parameters and perform re-
integration.
If an integration event is added or modified, the Edit integration event
window is opened where the following parameters can be set: