Metrohm 792 Basic IC - Manual (Page 49)

2 Installation
792 Basic IC
40
1
3
2
75 75 75 75
79 79 79 79
77 77 77 77
76 76 76 76 78 78 78 78
80 80 80 80
Fig. 15: Connections at suppressor module
5 Inlet capillary for H
2
O
x Attach inlet capillary 77
77 77 77 marked with "H
2
O" of suppressor
module 39 39 39 39 using a 6.2744.010 Compression fitting to the filter
unit PEEK 28 28 28 28 connected to the front pump tubing 72 72 72 72.
6 Outlet capillary for H
2
O
x Pull outlet capillary 79
79 79 79 marked with "Waste" of the suppressor
module 39 39 39 39 from below through one of the openings 6666 out of
the inner compartment of the 792 Basic IC.
x Lead outlet capillary 79
79 79 79 to a sufficiently large waste container
and fix it in place.
7 Fasten capillaries to the side walls
x If necessary, the two aspirating tubings 68
68 68 68 and 69 69 69 69 can be
fixed in the required position in the interior with the help of a
Y.107.0150 self-adhesive strap.
x If necessary, the two outlet capillaries 79
79 79 79 and 80 80 80 80 can be fixed
in the required position in the interior with the help of a
Y.107.0150 self-adhesive strap.
75 75 75 75 Suppressor inlet capil-
lary for eluent
76 76 76 76 Suppressor outlet
capillary for eluent
77 77 77 77 Suppressor inlet capil-
lary for H
2
O
78 78 78 78 Suppressor inlet capil-
lary for H
2
SO
4
79 79 79 79 Suppressor outlet
capillary for H
2
O
80 80 80 80 Suppressor outlet
capillary for H
2
SO
4
Eluent
H
2
O
Detector
Waste
Waste
H
2
SO
4