Metrohm 792 Basic IC User Manual
Page 31
Advertising
2 Installation
792 Basic IC
22
4 Hardware settings
Of the general hardware settings only the input of the cell constant
is described. Standard settings can normally be used for all other
parameters.
x Click the 792 icon using the right mouse button and select
the
Hardware
item. The
Hardware settings
window is opened:
x In the
Cell constant
field enter the cell constant which is
printed on the 1.732.0110 Detector block (see section 2.3.1).
x Click on
<OK>
to close the window and save the settings.
Advertising