3 basic settings – Metrohm 792 Basic IC User Manual
Page 29
2 Installation
792 Basic IC
20
2.5.3 Basic
settings
When the program is started for the first time several basic settings
must be made for the 792 Basic IC. Proceed as follows:
1 Start program
x Double-click the software icon to start the program. The
program window with the opening picture is opened and the
Log In window appears on the screen:
x Do not enter any password here, just click on
<Log In>
. The
following window appears:
x Enter company, division and name and click on
<OK>
. This
window appears only one time after software installation.
2 COM port settings
This step must only be carried out if a different COM interface
from COM1 is used for connection to the 792 Basic IC.
x Click on
Options / 792 Basic IC:COM1
to open the
Links
window: