Tweco 42 CutMaster Service Manual - Manual (Page 60)

CUTMASTER 42 DISASSEMBLY PROCEDURE
Disassembly Procedure 7-4 Manual 0-5171
7.03 Front Panel Assembly Removal
!
Read and follow safety information in Section 6.02 before proceeding with disassembly
1. Case removal
Remove the ten screws from the cover panel and remove the cover panel
2. Remove the screws on front panel
3. Unplug the three harnesses from control PCB as shown in photo on following page.
4. Remove the two screws.
1
2
3
4
Art # A-10251