Disassembly procedure cutmaster 42 – Tweco 42 CutMaster Service Manual User Manual
Page 61
Advertising
Manual 0-5171 7-5
Disassembly Procedure
DISASSEMBLY PROCEDURE
CUTMASTER 42
7.04 Front Panel (Operator Interface) Circuit Board PCB3 Removal
!
Read and follow safety information in Section 6.02 before proceeding with disassembly.
1. Remove the screw on the potentiometer knob.
2. Remove the nut.
3. Remove the front panel PCB.
2
1
3
Art # A-10252
Advertising