03 installing front panel, Cutmaster 42 assembly procedures – Tweco 42 CutMaster Service Manual User Manual
Page 68
Advertising
Assembly Procedures 8-4 Manual 0-5171
CUTMASTER 42
ASSEMBLY PROCEDURES
8.03 Installing Front Panel
1. Place front panel PCB assembly into front panel. Install the nut and screw.
2. Reconnect three harnesses to control PCB.
3. Reconnect two red wires and install the screws.
4. Install the front panel screws.
4
2
3
Art # A-10259
1
Advertising