Tweco 42 CutMaster Service Manual - Manual (Page 63)

Manual 0-5171 7-7 Disassembly Procedure
DISASSEMBLY PROCEDURE CUTMASTER 42
7.06 Power Switch S1 and Power Cord Removal
!
Read and follow safety information in Section 6.02 before proceeding with disassembly
1. Gas inlet. Remove gas inlet from rear panel.
2. SW locking tabs
Squeeze the locking tabs and push SW out from the rear panel.
3. Loosen the cable anchorage.
4. Remove fan.
5 Pull the Input Power Cord out.
1
2
3
4
5
Art # A-10254
shi