Tweco 200 Ultra-Cut User Manual
Page 49
Advertising
Manual No. 0-5056 Ultra-Cut 200
3-25
INSTALLATION
3. Position the Arc Starter on a flat, horizontal mounting surface.
4. Use pre-drilled holes in at least two of the feet on the bottom of the Arc Starter to secure the Arc Starter to the
mounting surface.
Art # A-09626
Minimum 2
Input Connections
1. Refer to the illustrations. Make the following input connections to the Arc Starter.
•
Coolant Supply and Return Hoses (from power supply). Hoses and connectors are color-coded; Red
for Return, Green for Supply.
Coolant Supply and Return Hoses
(from power supply)
Art # A-09627
Supply
Return
Advertising