Dell PowerVault NX200 - Manual (Page 152)

150 Running the System Diagnostics
• Show Ending Timestamp — Time stamps the test log.
•
Test Iterations — Selects the number of times the test is run.
• Log output file pathname — Enables you to specify the diskette drive or
USB memory key where the test log file is saved. You cannot save the file to
a hard drive.
Viewing Information and Results
The following tabs in the Customize window provide information about the
test and the test results.
• Results — Displays the test that ran and the result.
•
Errors — Displays any errors that occurred during the test.
• Help — Displays information about the currently selected device,
component, or test.
• Configuration — Displays basic configuration information about the
currently selected device.
• Parameters — Displays parameters that you can set for the test.
book.book Page 150 Monday, August 9, 2010 3:07 PM