Dell PowerVault NX200 User Manual
Page 47
About Your System
47
Time-of-day not
set - please run
SETUP program
Incorrect Time or
Date settings;
faulty system battery.
Check the Time and Date
settings. See "Using the
page 51. If the problem
persists, replace the system
battery. See "Chassis
Timer chip
counter 2 failed
Faulty system board.
TPM
configuration
operation
honored. System
will now reset.
A TPM configuration
command has been entered.
The system will reboot and
execute the command.
Information only.
TPM
configuration
operation is
pending. Press
(I) to Ignore OR
(M) to Modify to
allow this change
and reset the
system.
WARNING:
Modifying could
prevent
security.
This message is displayed
during system restart after a
TPM configuration
command has been entered.
User interaction is required
to proceed.
Enter I or M to proceed.
TPM failure
A Trusted Platform Module
(TPM) function has failed.
Table 1-2. System Messages
(continued)
Message
Causes
Corrective Actions
book.book Page 47 Monday, August 9, 2010 3:07 PM