Dell PowerVault NX200 - Manual (Page 60)

58 Using the System Setup Program and UEFI Boot Manager
Integrated Devices Screen
Option Description
Integrated SATA
Controller (Enabled
default)
Enables or disables the integrated SATA controller.
User Accessible USB Ports
(All Ports On default)
Enables or disables the user accessible USB ports.
Options are All Ports On, Only Back Ports On, and All
Ports Off.
Internal USB Port
(On default)
Enables or disables the internal USB port.
Embedded NIC1 and
NIC2
Enables or disables the operating system interface of the
embedded NICs. The NICs may also be accessed through
the system's management controller.
Embedded Gb NIC1
(Enabled with PXE
default)
Enables or disables the embedded NIC. Options are
Enabled, Enabled with PXE, Enabled with iSCSI Boot,
and Disabled. PXE support allows the system to boot
from the network.
MAC Address Displays the MAC address for the NIC.
Embedded Gb NIC2
(Enabled default)
Enables or disables the embedded NIC.
OS Watchdog Timer
(Disabled default)
Sets a timer to monitor the operating system for activity,
and aids in recovery if the system stops responding.
When Enabled, the operating system is allowed
to initialize the timer. When Disabled, the timer is
not initialized.
NOTE: This feature is usable only with operating systems
that support WDAT implementations of the Advanced
Configuration and Power Interface (ACPI) 3.0b
specification.
Embedded Video
Controller
(Enabled default)
Displays the total amount of video memory available in
the embedded video controller.
book.book Page 58 Monday, August 9, 2010 3:07 PM