Dell PowerVault NX200 - Manual (Page 27)

About Your System 27
E1420 CPU Bus
parity error.
Power cycle
AC.
The system BIOS has
reported a processor
bus parity error.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 157.
E1422 CPU # machine
check error.
Power cycle
AC.
The system BIOS has
reported a machine
check error.
Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 157.
E1610 Power Supply
# (### W)
missing.
Check power
supply.
Specified power supply
was removed or is
missing from the system.
See "Troubleshooting the
Power Supply" on page 135.
E1614 Power Supply
# (### W)
error. Check
power supply.
Specified power supply has
failed.
See "Troubleshooting the
Power Supply" on page 135.
E1618 Predictive
failure on
Power Supply
# (### W).
Check PSU.
A power supply fan failure,
an over-temperature
condition, or power supply
communication error has
caused the predictive
warning of an impending
power supply failure.
See "Troubleshooting the
Power Supply" on page 135.
E161C Power Supply
# (### W)
lost AC
power. Check
PSU cables.
Specified power supply is
attached to the system, but
it has lost its AC input.
Check the AC power
source for the specified
power supply. If the
problem persists,
see "Troubleshooting the
Power Supply" on page 135.
Table 1-1. LCD Status Messages (continued)
Code Text Causes Corrective Actions
book.book Page 27 Monday, August 9, 2010 3:07 PM