Dell PowerVault NX200 - Manual (Page 67)

Using the System Setup Program and UEFI Boot Manager 65
UEFI Boot Settings Screen
System Utilities Screen
System and Setup Password Features
NOTE: For a forgotten password, see "Disabling a Forgotten Password" on
page 156.
Your system is shipped without the system password feature enabled.
Operate the system only with system password protection.
CAUTION: The password features provide a basic level of security for the data
on your system.
CAUTION: Anyone can access the data stored on your system if the system is
running and unattended.
Option Description
Add Boot Option Adds a new boot option.
Delete Boot Option Deletes an existing boot option.
Enable/Disable Boot
Option
Disables and enables a boot option in the boot option
list.
Change Boot Order Changes the order of the boot option list.
One-Time Boot From File Sets a one-time boot option not included in the
boot option list.
Option Description
System Setup Accesses the System Setup program without rebooting.
System Services (USC) Restarts the system and accesses the USC, which allows
you to run utilities such as system diagnostics.
BIOS Boot Manager Accesses the BIOS-level boot options list without
rebooting. This option enables you to conveniently
switch to BIOS boot mode if you need to boot to a
device with a non-UEFI operating system, such as a
bootable DOS media with diagnostics software.
Reboot System Restarts the system.
book.book Page 65 Monday, August 9, 2010 3:07 PM