Dell POWERVAULT MD3620I - Manual (Page 127)

Configuration: Disk Groups and Virtual Disks 127
for storage on other media. When you change a security key, you also provide
information to create a security key identifier. Changing the security key does
not destroy any data. You can change the security key at any time.
Before you change the security key, ensure that:
• All virtual disks in the storage array are in Optimal status.
• In storage arrays with two RAID controller modules, both are present and
working normally.
To change the security key:
1 In the AMW toolbar, select Storage ArrayPhysical Disk Security
Change Security Key.
The
Confirm Change Security Key window is displayed.
2 Type yes in the text field, and click OK.
The Change Security Key window is displayed.
3 In Secure key identifier, enter a string that becomes part of the secure key
identifier.
You may leave the text box blank, or enter up to 189 alphanumeric
characters without white space, punctuation, or symbols. Additional
characters are generated automatically.
4 Edit the default path by adding a file name to the end of the path or click
Browse, navigate to the required folder and enter the name of the file.
5 In Pass phrase, enter a string for the pass phrase.
The pass phrase must:
• be between 8 and 32 characters long.
• contain at least 1 uppercase letter.
• contain at least 1 lowercase letter.
• contain at least 1 number.
• contain at least 1 non-alphanumeric character, for example, < > @
+.
The pass phrase that you enter is masked.
book.book Page 127 Tuesday, June 18, 2013 3:09 PM