Dell POWERVAULT MD3620I - Manual (Page 95)

Configuration: Using iSCSI 95
Viewing iSCSI Statistics and Setting Baseline
Statistics
To view iSCSI statistics and set baseline statistics:
1 In the AMW toolbar, select Storage Array iSCSI Statistics.
The View iSCSI Statistics window is displayed.
2 Select the iSCSI statistic type you want to view in the iSCSI Statistics
Type area. You can select:
•
Ethernet MAC statistics
• Ethernet TCP/IP statistics
• Target (protocol) statistics
3 In the Options area, select:
• Raw statistics—To view the raw statistics. Raw statistics are all the
statistics that are gathered since the RAID controller modules were
powered on.
• Baseline statistics—To view the baseline statistics. Baseline statistics
are point-in-time statistics that are gathered since you set the baseline
time.
After you select the statistics type and either raw or baseline statistics, the
details of the statistics are displayed in the statistics tables.
NOTE: You can click Save As to save the statistics that you are viewing in a
text file.
4 To set the baseline for the statistics:
a Select Baseline statistics.
b Click Set Baseline.
c Confirm that you want to set the baseline statistics in the dialog that
is displayed.
The baseline time shows the latest time you set the baseline. The sampling
interval is the difference in time from when you set the baseline until you
launch the dialog or click Refresh.
NOTE: You must first set a baseline before you can compare baseline
statistics.
book.book Page 95 Tuesday, June 18, 2013 3:09 PM