Dell POWERVAULT MD3620I - Manual (Page 76)

76 Configuration: About Your Storage Array
Removing Storage Arrays
You can remove a storage array from the list of managed arrays if you no
longer want to manage it from a specific storage management station.
Removing a storage array does not affect the storage array or its data in any
way. Removing a storage array simply removes it from the list of storage arrays
that are displayed in the drop-down list in the Array Selector. If a storage array
is accidentally removed, it can be added again. See "Adding Storage Arrays"
on page 68.
You can remove the storage array only from the EMW.
To remove the storage array:
1 In the EMW, select the Devices tab and select the relevant managed
storage array.
2 Select Edit Remove Storage Array.
A message prompts you for a confirmation for the removal of the selected
storage array.
3 To remove the storage array, click Yes.
Enabling Premium Features
You can enable premium features on the storage array. To enable the premium
features, you must obtain a feature key file specific to the premium feature
that you want to enable from your storage supplier.
To enable premium features:
1 From the toolbar in AMW, select Storage Array Premium Features.
The Premium Features and Feature Pack Information window is
displayed.
2 Select the relevant premium feature, and click Enable.
The Select Feature Key File dialog is displayed.
3 Navigate to the relevant folder, select the appropriate key file, and click
OK.
4 Click Close.
For more information, see the PowerVault Modular Disk Storage Manager
online help topics.
book.book Page 76 Tuesday, June 18, 2013 3:09 PM