Dell POWERVAULT MD3620I - Manual (Page 214)

212 Management: Firmware Downloads
7 Perform one of these actions:
• Select Tools Upgrade RAID Controller Module Firmware.
• Select the Setup tab, and click Upgrade RAID Controller Module
Firmware.
The Upgrade RAID Controller Module Firmware window is displayed.
The Storage array pane lists the storage arrays. The Details pane shows the
details of the storage array that is selected in the Storage array pane.
8 In the Storage array pane, select the storage array for which you want to
download the NVSRAM firmware.
You can select more than one storage array.
NOTE: The Details pane shows the details of only one storage array at a time.
If you select more than one storage array in the Storage array pane, the
details of the storage arrays are not shown in the Details pane.
9 Click NVSRAM in the Download area.
NOTE: If you select a storage array that cannot be upgraded, the NVSRAM
button is disabled.
The Download NVSRAM dialog is displayed. The current firmware
version and the NVSRAM version of the selected storage arrays is
displayed.
NOTE: If you select the storage arrays with different RAID controller module
types that cannot be updated with the same NVSRAM file and click NVSRAM,
the Incompatible RAID Controller Modules dialog is displayed. Click OK to
close the dialog and select the storage arrays with similar RAID controller
module types.
10 To locate the directory in which the NVSRAM file to download resides,
click Browse in the Select file area.
The Select File dialog is displayed.
11 Select the file to download and click OK.
Any attributes of the NVSRAM file is displayed in the NVSRAM file
information area. The attributes indicate the version of the NVSRAM file.
book.book Page 212 Tuesday, June 18, 2013 3:09 PM