Finding nodes – Dell POWERVAULT MD3620I User Manual

Page 261

Advertising
background image

Troubleshooting: Your Storage Array Software

259

Finding Nodes

You can use the Find option to search for a particular node on the Logical

tab, the Physical tab, or the Mappings tab of the AMW. The search may be

based on a particular node name, the RAID level, virtual disk capacity, or

specific free capacity nodes. The search may be based also on one of these

combinations:

• The node name and the RAID level
• The node name and the virtual disk capacity

To find nodes:

1 In the AMW, select View Find.
2 Based on the type of search, select one of these options, and go to the

indicated step:
• Search by name—see step 3.
• Search by special criteria—see step 4.

3 Type the name of the node to be found in Find Node. See step 8.
4 Based on the search criteria, select one of these options, and go to the

indicated step:
• Find all virtual disks with RAID level—Go to step 5.
• Find all virtual disks with capacity—Go to step 6.
• Find all free capacity nodes—Go to step 7.

5 To search for all nodes based on their RAID level, perform these steps:

a

Select Find all virtual disks with RAID level.

b

Select the RAID level from the list.

c

Go to step 8.

6 To search for all nodes based on their virtual disk capacity, perform these

steps:

a

Select Find all virtual disks with capacity.

b

Type the capacity in the GB box.

c

Specify that the capacity to be matched is less than, equal to, or

greater than the capacity entered in the

GB box.

d

Go to step 8.

book.book Page 259 Tuesday, June 18, 2013 3:09 PM

Advertising
This manual is related to the following products: