Dell POWERVAULT MD3620I - Manual (Page 71)

Configuration: About Your Storage Array 71
• Configure iSCSI host ports—Configure network parameters for each
iSCSI host port automatically or specify the configuration information for
each iSCSI host port.
• Configure the storage array—Create disk groups, virtual disks, and hot
spare physical disks by using the Automatic configuration method or the
Manual configuration method. For more information, see the PowerVault
Modular Disk Storage Manager online help topics.
• Map virtual disks—Map virtual disks to hosts or host groups.
• Save configuration—Save the configuration parameters in a file that you
can use to restore the configuration, or reuse the configuration on another
storage array. For more information, see the PowerVault Modular Disk
Storage Manager online help topics.
After you complete the basic steps for configuring the storage array, you can
perform these optional tasks:
• Manually define hosts—Define the hosts and the host port identifiers that
are connected to the storage array. Use this option only if the host is not
automatically recognized and shown in the Mappings tab.
• Configure Ethernet management ports—Configure the network
parameters for the Ethernet management ports on the RAID controller
modules if you are managing the storage array by using the out-of-band
management connections.
• View and enable premium features—Your MDSM may include premium
features. View the premium features that are available and the premium
features that are already started. You can start available premium features
that are currently stopped.
• Manage iSCSI settings—You can configure iSCSI settings for
authentication, identification, and discovery.
book.book Page 71 Tuesday, June 18, 2013 3:09 PM