Dell POWERVAULT MD3620I - Manual (Page 252)

250 Troubleshooting: Your Storage Array Software
In the Tree view, icons can are displayed in a string to convey more
information. For example, the following string means that the storage array is
optimal, an alert is set for the storage array, and firmware is available for
download.
NOTE: MDSM may take a few minutes to update a status change to Unresponsive
or from Unresponsive. A status change from or to Unresponsive depends on the
network link to the storage array. All other status change updates faster.
Adding a Storage
Array
The Contacting Storage Array icon is shown in
the Tree view and Table view until the current
status of each managed storage array is known.
The Contacting Storage Array icon is shown in
the EMW Status Bar and the AMW Status Bar
and the tooltip shows Contacting Storage arrays.
As each storage array is contacted, its current
status is obtained and shown in the Tree view and
Table view. The applicable statuses are the
Optimal, Needs Attention, Fixing, or
Unresponsive.
Adding a Storage
Array OK
No problems were encountered while adding the
storage array.
MDSM software continues to check for any
status change events.
Adding a Storage
Array Error
Displayed only when an error occurs.
Table 19-3. Additional Status Icons
Status Icon Description
book.book Page 250 Tuesday, June 18, 2013 3:09 PM