Dell POWEREDGE M1000E - Manual (Page 133)

To configure the objects for the single domain scenario:
1. Create two Association Objects.
2. Create two RAC Device Objects, RAC1 and RAC2, to represent the two CMCs.
3. Create two Privilege Objects, Priv1 and Priv2, in which Priv1 has all privileges (administrator) and Priv2 has login
privilege.
4. Group user1 and user2 into Group1.
5. Add Group1 as Members in Association Object 1 (A01), Priv1 as Privilege Objects in A01, and RAC1, RAC2 as RAC
Devices in A01.
6. Add User3 as Members in Association Object 2 (A02), Priv2 as Privilege Objects in A02, and RAC2 as RAC Devices
in A02.
The following figure provides an example of Active Directory objects in multiple domains. In this scenario, you have two
CMCs (RAC1 and RAC2) and three existing Active Directory users (user1, user2, and user3). User1 is in Domain1, and
user2 and user 3 are in Domain2. In this scenario, configure user1 and user 2 with administrator privileges to both CMCs
and configure user3 with login privileges to the RAC2 card.
To configure the objects for the multiple domain scenario:
133