Dell POWEREDGE M1000E - Manual (Page 194)

– If the mode is set to Screen, the OSCAR flag bounces around the screen for the duration of the test. Before the
test starts, a warning popup box displays the following message: "Energy mode may damage a monitor that is
not ENERGY STAR compliant. However, once started, the test can be quit immediately via mouse or keyboard
interaction."
CAUTION: Monitor damage may result from the use of Energy mode with monitors not compliant with Energy
Star.
5. Optional: To activate the screen saver test, click Test. The Screen Saver Test dialog box displays. Click OK to start
the test.
The test takes 10 seconds. After it completes, you are returned to the Security dialog box.
Setting Automatic Logout
You can set OSCAR to automatically log out of a server after a period of inactivity.
1. In the Main dialog box, click Setup and then Security.
2. In the Inactivity Time field, enter the length of time you want to stay connected to a server before it automatically
disconnects you.
3. Click OK .
Removing Password Protection From the Console
To remove password protection from your console:
1. In the Main dialog box, click Setup and then Security.
2. In the Security dialog box, single-click and press <Enter>, or double-click in the New field.
3. Leave the New field empty and press <Enter>.
4. Single-click and press <Enter> , or double-click in the Repeat field.
5. Leave the Repeat field empty and press <Enter>.
6. Click OK.
Enabling Screen Saver Mode With No Password Protection
NOTE: If your console is password-protected, you must first remove password protection. Remove the password
before enabling screen saver mode with no password protection.
To enable Screen Saver mode without password protection:
1. Select Enable Screen Saver.
2. Type the number of minutes (1 through 99) that you want to delay activation of the screen saver.
3. Select Energy if your monitor is ENERGY STAR compliant, otherwise select Screen.
CAUTION: Monitor damage may result from the use of Energy mode with monitors not compliant with Energy
Star.
4. Optional: To activate the screen saver test, click Test. The Screen Saver Test dialog box is displayed. Click OK to
start the test.
The test takes 10 seconds. After it completes, the Security dialog box is displayed.
NOTE: Enabling Screen Saver mode disconnects the user from a server. This means no server is selected. The
status flag displays Free.
Exiting Screen Saver Mode
To exit screen saver mode and return to the Main dialog box, press any key or move your mouse.
To turn off the screen saver, in the Security dialog box, clear the Enable Screen Saver box and click OK .
194