Graphical server status screen, Graphical module status screen, Enclosure menu screen – Dell POWEREDGE M1000E User Manual
Page 236
1.
Use the up and down arrow buttons to highlight the screen you want to set to the default.
2.
Press the center button.
The Accept icon is highlighted.
3.
Press the center button again to confirm the change.
The Default Screen is displayed.
Graphical Server Status Screen
The Graphical Server Status screen displays icons for each server installed in the chassis and indicates the general
health status for each server. The server health is indicated by the color of the server icon:
•
Gray — server is off with no errors
•
Green — server is on with no errors
•
Yellow — server has one or more non-critical errors
•
Red — server has one or more critical errors
•
Black — server is not present
A blinking light blue rectangle around a server icon indicates that the server is highlighted.
To view the Graphical Module Status screen, highlight the rotate icon, and press the center button.
To view the status screen for a server, use the arrow buttons to highlight the desired server, and press the center
button. The Server Status screen displays.
To return to the Main Menu, use the arrow buttons to highlight the Back icon, and press the center button.
Graphical Module Status Screen
The Graphical Module Status screen displays all modules installed in the rear of the chassis and provides summary
health information for each module. Module health is indicated by the color of each module icon as follows:
•
Gray — module is off or on standby with no errors
•
Green — module is on with no errors
•
Yellow — module has one or more non-critical errors
•
Red — server has one or more critical errors
•
Black — module is not present
A blinking light blue rectangle around a module icon indicates that the module is highlighted.
To view the Graphical Server Status screen, highlight the rotate icon, and press the center button.
To view the status screen for a module, use the up, down, left, and right arrow buttons to highlight the desired module,
and press the center button. The Module Status screen displays.
To return to the Main Menu, use the arrow buttons to highlight the Back icon, press the center button. The Main Menu
displays.
Enclosure Menu Screen
From this screen, you can navigate to the following screens:
•
Module Status screen
•
Enclosure Status screen
•
IP Summary screen
236