Dell POWEREDGE M1000E - Manual (Page 21)

Table 6. Supported Remote Access Connections
Connection Features
CMC Network Interface ports
• GB port: Dedicated network interface for the CMC Web interface. Two
10/100/1000 Mbps ports; one for management and the other for chassis to
chassis cable consolidation.
• STK: Uplink port for chassis to chassis management network cable
consolidation.
• 10 Mbps/100 Mbps/1 Gbps Ethernet through CMC GbE port.
• DHCP support.
• SNMP traps and email event notification.
• Network interface for the iDRAC and I/O Modules (IOMs).
• Support for Telnet/SSH command console and RACADM CLI commands
including system boot, reset, power-on, and shutdown commands.
Serial port
• Support for serial console and RACADM CLI commands including system boot,
reset, power-on, and shutdown commands.
• Support for binary interchange for applications specifically designed to
communicate with a binary protocol to a particular type of IOM.
• Serial port can be connected internally to the serial console of a server, or I/O
module, using the connect (or racadm connect) command.
Other connections
• Access to the Dell CMC console through the Avocent Integrated KVM Switch
Module (iKVM).
Supported Platforms
CMC supports modular systems designed for the PowerEdge M1000e platform. For information about compatibility with
CMC, see the documentation for your device.
For the latest supported platforms, see the
Readme located at dell.com/support/manuals.
Supported Web Browsers
For the latest information on supported Web browsers, see the Release Notes located at dell.com/support/manuals.
NOTE: CMC version 4.5 is supported on Microsoft Internet Explorer 11 for:
• Windows 8 x32 and x64
• Windows Server 2012 x64
Viewing Localized Versions of the CMC Web Interface
To view localized versions of the CMC Web interface:
1. Open the Windows Control Panel.
2. Double-click the Regional Options icon.
3. Select the required locale from the Your locale (location) drop-down menu.
21