Dell POWEREDGE M1000E - Manual (Page 246)

NOTE: This information is dynamically updated
Table 59. Server Status
Item Description
Example: Server 1, Server 2, etc. Name/Location.
No Errors If there are no errors then the message “No Errors” is
displayed, else error messages are listed. Critical errors
are listed first, followed by warnings. For more information
see
LCD Error Messages .
Slot Name Chassis slot name. For example, SLOT-01.
NOTE: You can set this table through the CMC CLI or
Web interface.
Name Name of the server, which the user can set through Dell
OpenManage. The name is displayed only if iDRAC has
finished booting, and the server supports this feature, else
iDRAC booting messages are displayed.
Model Number Displays if iDRAC finished booting.
Service Tag Displays if iDRAC finished booting.
BIOS Version Server BIOS firmware version.
Last POST Code Displays the last server BIOS POST code messages string.
iDRAC Firmware Version Displays if iDRAC finished booting.
NOTE: iDRAC version 1.01 is displayed as 1.1. There is
no iDRAC version 1.10.
IP4 <enabled, disabled> Displays the current IPv4 enabled state.
IP4 Address: <address, acquiring> Only displays if IPv4 is enabled.
IP6 <enabled, disabled> Only displays if iDRAC supports IPv6. Displays current
IPv6-enabled state.
IP6 Local Address: <address> Only displays if iDRAC supports IPv6 and IPv6 is enabled.
IP6 Global Address: <address> Only displays if iDRAC supports IPv6 and IPv6 is enabled.
FlexAddress enabled on Fabrics Only displays if the feature is installed. Lists the fabrics
enabled for this server (that is, A, B, C).
The information in the table is dynamically updated. If the server does not support this feature, then the following
information does not appear, else Server Administrator options are as follows:
• Option “None” = No strings must be displayed on the LCD.
• Option “Default” = No Effect.
• Option “Custom” = Allows you to enter a string name for the server.
246