Dell POWEREDGE M1000E User Manual
Page 139
Related Links
Creating RAC Device Object
To create RAC device object:
1.
In the Console Root (MMC) window, right-click a container.
2.
Select New → Dell Remote Management Object Advanced.
The New Object window is displayed.
3.
Enter a name for the new object. The name must be identical to the CMC name that you provide in "Configuring
Active Directory With Extended Schema Using CMC Web Interface”.
4.
Select RAC Device Object and click OK.
Creating Privilege Object
To create privilege object:
NOTE: You must create a privilege object in the same domain as the related association object.
1.
In the Console Root (MMC) window, right-click a container.
2.
Select New → Dell Remote Management Object Advanced.
The New Object window is displayed.
3.
Enter a name for the new object.
4.
Select Privilege Object and click OK.
5.
Right-click the privilege object that you created, and select Properties.
6.
Click the RAC Privileges tab and assign the privileges for the user or group.
For more information about CMC user privileges, see
.
Creating Association Object
The Association Object is derived from a Group and must contain a Group Type. The Association Scope specifies the
Security Group Type for the Association Object. When you create an Association Object, choose the Association Scope
that applies to the type of objects you intend to add. For example, if you select Universal, the association objects are
only available when the Active Directory Domain is functioning in Native Mode or above.
To create association object:
1.
In the Console Root (MMC) window, right-click a container.
2.
Select New → Dell Remote Management Object Advanced.
This New Object window is displayed.
3.
Enter a name for the new object and select Association Object.
4.
Select the scope for the Association Object and click OK.
Adding Objects to Association Object
Using the Association Object Properties window, you can associate users or user groups, privilege objects, and RAC
devices or RAC device groups. If your system is running on Microsoft Windows 2000 mode or higher, use Universal
Groups to span domains with your user or RAC objects.
139