Removing vlans for ioms using cmc web interface – Dell POWEREDGE M1000E User Manual
Page 183
Viewing the VLAN settings on IOMs Using CMC Web Interface
To view the VLAN settings on IOM(s) using the CMC Web interface:
1.
In the system tree, go to I/O Module Overview and click Setup → VLAN Manager.
The VLAN Manager page is displayed.
The Summary VLANs of All Ports section displays information about the current VLAN settings for the IOMs.
2.
Click Save to save the VLAN settings to a file.
Viewing the Current VLAN Settings on IOMs Using CMC Web Interface
To view the current VLAN settings on IOMs using the CMC Web Interface:
1.
In the system tree, go to I/O Module Overview and click Setup → VLAN Manager .
The VLAN Manager page is displayed.
2.
In the Edit VLANs section, select Show VLANs in the drop down list and click Apply.
An Operation Successful message is displayed. The current VLAN settings that are assigned to the IOMs are
displayed in the VLAN Assignment Summary field.
Adding Tagged VLANs for IOMs Using CMC Web Interface
To add tagged VLANs for IOM(s) using the CMC Web interface:
1.
In the system tree, go to I/O Module Overview and click Setup → VLAN Manager.
The VLAN Manager page is displayed.
2.
In the Step 1: Select I/O Module section, select the required IOMs.
3.
In the Step 2: Specify Port Range section, select the range of fabric ports to be assigned to the selected IOM(s).
For information about the fields, see
CMC Online Help
.
4.
Select the Selector Deselect All option to apply the changes to all or no IOMs.
or
Select the check box against the specific slots to select the required IOMs.
5.
In the Step 3: Edit VLANs section, select Add Tagged VLANs in the drop down list and click Apply.
The tagged VLANs are assigned to the selected IOMs.
The operation successful message is displayed. The current VLAN settings that are assigned to the IOMs are
displayed in the VLAN Assignment Summary field .
Removing VLANs for IOMs Using CMC Web Interface
To remove VLANs from IOM(s) using the CMC Web interface:
1.
In the system tree, go to I/O Module Overview and click Setup → VLAN Manager.
The VLAN Manager page is displayed.
2.
In the Step 1: Select I/O Module section, select the required IOMs.
3.
In the Step 3: Edit VLANs section, select Remove VLANs in the drop down list and click Apply.
The VLANs assigned to the selected IOMs are removed.
An Operation Successful message is displayed. The current VLAN settings that are assigned to the IOMs are
displayed in the VLAN Assignment Summary field.
183