Dell POWEREDGE M1000E User Manual
Page 182
The valid values for <VLAN priority> are 0 – 7. Default is 0.
For example:
racadm setniccfg -m switch -1 -v 1 7
For example:
•
To remove an IOM VLAN, disable the VLAN capabilities of the specified IOM's network:
racadm setniccfg -m switch-<n> -v
The valid values for <n> are 1 – 6.
For example:
racadm setniccfg -m switch-1 -v
Configuring VLAN settings on IOMs Using CMC Web Interface
NOTE: You can configure VLAN settings only on PowerEdge M I/O Aggregator IOM. Other IOMs including MXL
10/40GbE are not supported.
To configure the VLAN settings on IOM(s) using the CMC Web interface:
1.
In the system tree, go to I/O Module Overview and click Setup → VLAN Manager.
The VLAN Manager page displays the IOM(s) that are turned on and the available ports.
2.
In the Step 1: Select I/O Module section, select the configuration type from the drop down list, and then select the
required IOM(s).
For information about the fields, see
CMC Online Help
3.
In the Step 2: Specify Port Range section, select the range of fabric ports to be assigned to the selected IOM(s).
For information about the fields, see
CMC Online Help
4.
Select the Selector Deselect All option to apply the changes to all or no IOMs.
or
Select the check box for the specific slots to select the required IOMs.
5.
In the Step 3: Edit VLANs section, type the VLAN IDs for the IOMs. Provide VLAN IDs in the range 1-4094. VLAN IDs
can be typed as a range or separated by a comma. Example: 1,5,10,100-200.
6.
Select one of the following options from the drop-down menu as required:
– Add Tagged VLANs
– Remove VLANs
– Update untagged VLANs
– Reset to all VLANs
– Show VLANs
7.
Click Save to save the new settings made to the VLAN Manager page.
For information about the fields, see
CMC Online Help
NOTE: The Summary VLANs of All Ports section displays information about the IOMs present in the Chassis
and the assigned VLANs. Click Save to save a csv file of the summary of the current VLAN settings.
NOTE: The CMC Managed VLANs section displays the summary of all VLANs assigned to the IOMs.
8.
Click Apply.
The network settings are configured for the IOM(s).
182