System board jumpers, Figure a-2 for jumper location. if the, Boot the system. see figure a-2 for – Dell PowerEdge 1800 User Manual
Page 140
Advertising
140
Jumpers, Switches, and Connectors
www
.dell.com | support.dell.com
System Board Jumpers
Figure A-2 shows the location of the configuration jumpers on the system board. Table A-1 lists the
jumpers settings.
Figure A-2.
System Board Jumpers
Table A-1.
System Board Jumper Settings
Jumper
Setting
Description
J55 pins 1 and 2
(default)
The password feature is enabled.
The password feature is disabled.
J55 pins 3 and 4
(default)
The configuration settings in NVRAM are retained at system
boot.
The configuration settings in NVRAM are cleared at next
system boot.
jumpered
unjumpered
Advertising