Removing an expansion card, Installed. see "removing an expansion card, D guide. see figure 6-3 – Dell PowerEdge 1800 User Manual
Page 77
Installing System Options
77
Figure 6-3.
Removing and Installing an Expansion Card
Removing an Expansion Card
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the
online or telephone service and support team. Damage due to servicing that is not authorized by Dell is
not covered by your warranty. Read and follow the safety instructions that came with the product.
1
Turn off the system, including any attached peripherals, and disconnect the system from the
electrical outlet.
2
Open the system. See "Opening the System" in "Troubleshooting Your System."
3
If your system is configured as a tower, lay the system on its right side.
4
Disconnect any cables attached to the card.
screw
expansion card
expansion-card connector
card-edge connector
expansion-card guide
expansion-card
securing tab