Dell PowerEdge 1800 - Manual (Page 99)

Installing Drives
99
Figure 7-3. Installing a 5.25-Inch Drive
8 Connect a DC power cable connector to the drive's power input connector. See Figure 7-3.
9 If you are connecting the drive to a controller card, proceed to step 10. If you are connecting
the interface cable to a system board connector:
a Remove the baffle/back fan assembly. See "Removing the Baffle/Back Fan Assembly."
b Press and hold the expansion-card guide release tab and remove the expansion-card
guide. See Figure 6-1.
c Remove the four drive bay screws and slide the drive bay forward to access the drive-cable
retainer.
5.25-inch drive
externally accessible drive bay
power cable
interface cable
screws (2)