Dell PowerEdge 1800 - Manual (Page 22)

22
Indicators, Codes, and Messages
www
.dell.com | support.dell.com
ECC memory error Faulty or improperly installed memory
modules. See "Troubleshooting System Memory"
in "Troubleshooting Your System."
Embedded RAID error Embedded RAID firmware responds
with an error. This message is not applicable to this
system.
Embedded RAID Firmware is
not present
Embedded RAID Firmware does not
respond. This message is not applicable to this
system.
Error: Incorrect memory
configuration.
Ensure memory in slots
DIMM1_A and DIMM1_B,
DIMM2_A and DIMM2_B,
DIMM3_A and DIMM3_B match
identically in size,
speed, and rank.
Unmatched DIMM pairs are detected. Ensure that the memory modules are
installed in matched pairs. See "General
Memory Module Installation
Guidelines" in "Installing System
Components."
Error: Incorrect memory
configuration.
Memory slots DIMM3_A and
DIMM3_B only support
single rank DIMMs. Remove
the dual rank DIMMs from
slots DIMM3_A and DIMM3_B.
Dual-rank memory modules are
installed in memory slots DIMM3_A
and DIMM3_B. These memory slots
do not support dual-rank memory
modules. Remove the memory modules from slots
DIMM3_A and DIMM3_B. See
"General Memory Module Installation
Guidelines" in "Installing System
Components."
Error: Incorrect memory
configuration.
Memory slots DIMM3_A and
DIMM3_B must be empty if
Dual Rank memory DIMMs are
in slots DIMM2_A and
DIMM2_B.
Memory modules are installed in
memory slots DIMM3_A and
DIMM3_B. These memory slots must
be empty if dual rank DIMMs are
installed in memory slots DIMM2_A
and DIMM2_B. Remove the memory modules from slots
DIMM3_A and DIMM3_B. See
"General Memory Module Installation
Guidelines" in "Installing System
Components."
Error: Incorrect memory
configuration.
Move DIMM3_A and DIMM3_B
into DIMM2_A and DIMM2_B.
Memory modules are not populated
from lowest-number bank to highest-
number bank. Move memory modules from memory
slots DIMM3_A and DIMM3_B into
memory slots DIMM2_A and
DIMM2_B. See "General Memory
Module Installation Guidelines" in
"Installing System Components."
Table 2-8. System Messages (continued)
Message Causes Corrective Actions