Baffle/back fan assembly – Dell PowerEdge 1800 User Manual
Page 52
52
Troubleshooting Your System
www
.dell.com | support.dell.com
2
Fit the cover on the side of the system, and slide the cover backward.
3
Tighten the three cover thumbscrews. See Figure 5-4.
4
If your system is a tower, stand it upright.
5
Replace the bezel.
Baffle/Back Fan Assembly
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the
online or telephone service and support team. Damage due to servicing that is not authorized by Dell is
not covered by your warranty. Read and follow the safety instructions that came with the product.
The vertical plastic baffle/back fan assembly in the center of the system improves system cooling by
guiding the airflow within the system. You must remove the baffle/back fan assembly when
performing certain procedures inside the system to improve access to some internal components.