Dell POWEREDGE C6105 - Manual (Page 103)

Installing System Components | 103
Figure 3-11. Removing the LSI 9260-8i Card Assembly
1 screw (4) 2 LSI 9260-8i-card assembly
3 system-board assembly
5 Remove the screw securing the LSI 9260-8i card.
6 Grasp the LSI 9260-8i card by its edges, and carefully remove it from
the expansion-card connector.
7 If you are removing the card permanently, install an expansion-card
slot cover over the empty expansion slot opening, and close the
expansion-card latch.
NOTE: You must install a filler bracket over an empty expansion slot to
maintain Federal Communications Commission (FCC) certification of the
system. The brackets also keep dust and dirt out of the system and aid in
proper cooling and airflow inside the system.