Dell POWEREDGE C6105 - Manual (Page 78)

78 | Using the System Setup Program
Token Setup option Description
5123 VT-UTF8 Combo
Key Support Disable VT-UTF8 Combination Key Support for
ANSI/VT100 terminals.
5124 VT-UTF8 Combo
Key Support Enable VT-UTF8 Combination Key Support for
ANSI/VT100 terminals
5125 CS Sparing Enable Not reserve a spare memory rank in each channel.
5126 CS Sparing Enable Reserve a spare memory rank in each channel.
The IPMI command table
IPMI command
Setup option Description
ipmitool raw 0x34 0x78 1
<LSB watt> <MSB
watt> PSU Power Capping The setting controls PSU Power, its
range limited in 150˜2000W. The
value will send to BMC by IPMI
command and BMC will control
PSU power. This setting only can
be seen when ―Power
Management‖ be selected to
―APML‖ mode and the system
board at location 4 in the chassis.
ipmitool raw 0xc 1 1 3
<IP Address> IP Address Uses this option to input BMC
LAN port IP address.
ipmitool raw 0xc 1 1 6
<Subnet Mask> Subnet Mask Uses this option to input BMC
LAN port subnet mask address.
ipmitool raw 0xc 1 1 12
<IP Address> GateWay Address Uses this option to input BMC
LAN port Gateway address.