Figure 3-16 – Dell POWEREDGE C6105 User Manual
Page 112
112
|
Installing System Components
4 Lift the LSI 9265-8i card assembly out of the system-board assembly.
Figure 3-16. Removing the LSI 9265-8i Card Assembly
1
screw (4)
2
LSI 9265-8i-card assembly
3
system-board assembly
5 Remove the screw securing the LSI 9265-8i card. See Figure 3-17.
6 Grasp the LSI 9265-8i card by its edges, and carefully remove it from
the expansion-card connector. See Figure 3-17.
7 If you are removing the card permanently, install an expansion-card
slot cover over the empty expansion slot opening, and close the
expansion-card latch.
NOTE: You must install a filler bracket over an empty expansion slot to
maintain Federal Communications Commission (FCC) certification of the
system. The brackets also keep dust and dirt out of the system and aid in
proper cooling and airflow inside the system.