Dell POWEREDGE C6105 - Manual (Page 104)

104 | Installing System Components
Figure 3-12. Removing the LSI 9260-8i Card
1 expansion-card slot cover 2 screw
3 LSI 9260-8i card 4 expansion-card connector
8 Remove the BBU interposer card by unscrewing the three screws.
9 Lift the BBU interposer card away from the LSI9260-8i card.
10 Disconnect the RAID battery cable from the BBU interposer card.
Installing the LSI 9260-8i Card
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
CAUTION: Expansion cards can only be installed in the slots on the expansion-
card riser. Do not attempt to install expansion cards directly into the riser
connector on the system board.