Dell POWEREDGE C6105 - Manual (Page 79)

Using the System Setup Program | 79
IPMI command Setup option Description
ipmitool raw 0x30 1
Return: ID
ipmitool raw 0x30 3 ID
0x11 0x2 0 0 0 1 <Delay
Mode>
Power Staggering
AC Recovery Configures power recovery
behavior. This item only can be
seen when ―Remote on AC Power
Loss‖ be selected in ―Power On‖ or
―Last State‖.
This parameter is only effective if
the Power Policy is not set to
always off.
0x00: Immediate Power On (No
Delay) : Default
0x01: Auto (Random), the auto
generated delay time must be in
the range of Minimum Power On
Delay and Maximum Power On
Delay.
0x02: User Defined, the user
defined delay time must be in the
range of Minimum Power On
Delay and Maximum Power On
Delay.
ipmitool raw 0x30 1
Return: ID
ipmitool raw 0x30 3 ID
0x11 0x4 0 0 0 1 <LSB
timer> <MSB timer> Minimum Power
On Delay Configures time for power on
delay, the setting range of delay
time is 0˜255sec.
ipmitool raw 0x30 1
Return: ID
ipmitool raw 0x30 3 ID
0x11 0x5 0 0 0 1 <LSB
timer> <MSB timer> Maximum Power
On Delay Configures time for power on
delay, the setting range of delay
time is 0˜255sec.
ipmitool raw 0x30 1
Return: ID
ipmitool raw 0x30 3 ID
0x11 0x3 0 0 0 1 <LSB
timer> <MSB timer> Power On Delay Configures time for power on
delay, the setting range of delay
time is 0˜255sec.